ISO Certificate
(PDF - 166KB)
All Categories > Stamping Tooling Services > Compound Dies / Tooling  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Compound Dies / Tooling

List Price QUOTE


Compound Die Stamping is the process where the die separates or blanks the part from a steel strip in one stroke. A Compound Die will perform multiple cuts or punches in one stroke, as compared to multiple strokes. This is a very cost effective method for stamping medium to high volume parts while keeping labor and die costs down. Compound Dies are often used to stamp simpler flat parts such as washers.

Here at DACO Precision-Tool it’s our goal to design and build our Compound Dies to exceed 100 strokes per minute to support high volume production. We can achieve this by building in sensors and other accessories to protect the die from damage. Cycle time is always kept in mind when designing and building our Compound Die tooling. We can build the die to stamp the part at the accuracy you need.

Parts are produced when the feed system pushes (strip or coil stock) of raw material into the Compound Die; at each stroke or cycle a finished flat part will blanked or released from the raw material. The feed rate of the material is determined by the size of the part. Larger parts need more time to exit the die, where smaller parts exit quicker allowing for faster run times. Typically, compound dies do not require a cut-off station because the parts are blanked through from the strip, but many times is added to help manage scrap material. Finished parts will be removed from the die by a knock-out and will fall onto a chute or slider where they flow into the collection bin. The scrap will exit the die in strip form or in piece form depending on if you’ve included a scrap cut-off station. Scrap can be collected in bins or hoppers on the exit end of the die.

Use the “Request Information” selection to contact us and provide your design documentation with your contact information for our Engineering Department to review and provide you with a quote.

Or if you have tooling that isn’t running right, or as quickly as you need or desire; let DACO Precision-Tool troubleshoot, modify, and repair existing tooling to get it up and running to a higher production rate for you.





 Specifications   Capabilities   Equipment List:   

Part Quantities

High Volume Tooling
Low Volume Tooling

Medium Volume Tooling

Lead Times

We pride ourselves on quick turn around of design concept tooling to completed production tooling.
Your product's design specifications, overall size and thickness of the material it will be forming will determine our tooling fabrication lead times.

Tolerances

+/- .005 on average production tooling, but not limited to, DACO will meet or exceed customer requirements.

Types of Tooling

Coining
Compound

Forming

Pierce & Cut

Progressive

Secondary

Trimming

Tool Sizes

Tools weighing up to 20,000 lbs, up to 6’ long and 6’ wide

Materials Used

1018
4140

A2

And Others

H13

M2

M4

S7


 MORE IMAGES 

·  Compound Die1

·  Compound Blanks

·  Compound Die

·  Compound Blank

·  Compound Blank Washers

·  Compound Blanks

·  (Homepage Thumbnail) Metal Stampings

·  Multiple Hole Washer

·  Multiple Hole Washer 2

·  Machinery Bushings

·  Tabbed Washer


 DOWNLOADS 

ISO Certificate 9001:2008
(PDF, 170KB)

*** VIDEO ***


Site created by ThomasNet Web Solutions and powered by Navigator Platform