ISO Certificate
(PDF - 166KB)
All Categories > Stamping Tooling Services > Progressive Dies / Tooling  
    Printable Page     Email Email This Page     Save To Favorites Save To Favorites

Progressive Dies / Tooling

Progressive Die Stamping is the process to modifying the raw material through a series of punch press cycles and the re-positioning of the raw material. You may see one or multiple processes combined to produce a finished part such as; Punching, Bending, Coining and Drawing or Tapping of the raw material. These processes; when performed in multiple operations or cycles of the press will produce a finished part through the progressive die/tool, saving you’re the expense of set-up time, and reduces the overall labor and production costs.

Here at DACO Precision-Tool it’s our goal to design and build our progressive dies to exceed 100 strokes per minute to support high volume production. We can achieve this by building in sensors and other accessories to protect the die from damage. Cycle time is always kept in mind when designing and building our progressive die tooling.

Parts are produced when the feed system pushes (strip or bulk coils) of raw material into the feed port of the progressive die tool; at each stroke or cycle of the press until the finished part is produced out the other end of the tooling. The feed rate of the material is controlled by the hard stops in each die section and the sensors built into the tooling. The final die section regardless of the number of tool/die sections required to produce a finished part; performs the cut-off operation. This separates the finished part from the carrying web; allowing the finished part to falls into the parts collection bin. The carrying web and material removed during the prior stages are conveyed to the scrap shoot and dropped into the scrap collection system.

Use the “Request Information” selection to contact us and provide your design documentation with your contact information for our Engineering Department to review and provide you with a quote.

Or if you have tooling that isn’t running right, or as quickly as you need or desire; let DACO Precision-Tool troubleshoot, modify, and repair existing tooling to get it up and running to a higher production rate for you.

 Specifications   Capabilities   Equipment List:   

Part Quantities

High Volume Tooling
Low Volume Tooling

Medium Volume Tooling

Lead Times

We pride ourselves on quick turn around of design concept tooling to completed production tooling.
Your product's design specifications, overall size and thickness of the material it will be forming will determine our tooling fabrication lead times.


+/- .005 on average production tooling, but not limited to, DACO will meet or exceed customer requirements.

Types of Tooling



Pierce & Cut




Tool Sizes

Tools weighing up to 20,000 lbs, up to 6’ long and 6’ wide

Materials Used



And Others






·  Progressive Die

·  Prohressive Die Parts

·  Progressive Die 4

·  Stamping Die

·  Revisions

·  Progressive Die_Punch and Form

·  Die Spread Open

·  Large Prog Bend Die

·  Progressive Die Open

·  Progressive Die Open 2


ISO Certificate 9001:2008
(PDF, 170KB)

*** VIDEO ***

Site created by ThomasNet Web Solutions and powered by Navigator Platform